Advertisement
MAINTENANCE
I. ACCESS TO CRITICAL PARTS
Please follow the steps below to gain access to heat pump components (including filter), anode rod, temperature
limiting reset button and electric heating elements (primary and back-up).
1. Slide the control panel upwards to expose control panel docking connector
2.
Remove connector and slide out the control panel completely
3.
Unfasten decorative panel screw
4.
Unfasten metal bracket
5.
Unfasten heat pump enclosure base screws
6.
Loosen power line adapter by turning it anti-clockwise
7.
Remove heat pump enclosure
If an exhaust air vent is attached to the unit, ensure that the vent is temporarily removed before heat pump enclo-
sure is taken off.
Fig. 7
20
Hide quick links:
Advertisement
