Summary of Contents for MasterForce FlexPower 252-8036
Page 1
Operator’s Manual 18V Universal Charger 252-8036 IMPORTANT : WARNING! To reduce the risk of injury, user must read instruction manual. Safety symbols in this manual are used to flag possible dangers. The safe- ty symbols and their explanations require your full understanding. The safety warnings do not, by themselves, eliminate any danger, nor are they substitute for proper accident prevention measures.
TABLE OF CONTENTS Safety Symbols ....................Page 3 Safety Instructions..................Page 4 Description ...................... Page 7 Operation ......................Page 8 Maintenance....................Page 10 Warranty......................Page 11 INTRODUCTION SAVE THESE INSTRUCTIONS! This charger has many features for making its use more pleasant and enjoyable.
SAFETY SYMBOLS The purpose of safety symbols is to attract you attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warning they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS IMPORTANT SAFETY RULES WARNING! For Indoor use only. WARNING! Dry location use only. WARNING! Risk of fire and electric shock. WARNING! Risk of injury. WARNING! Charg only Masterforce 252-8024, 252-8028, and 252-8032 re- chargeable battery packs. Other types of battery pack may burst causing in- jury to persons and damage.
Page 5
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
Page 6
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that: The pins on plug of extension cord are the same number, size and shape as those of the plug on charger.
DESCRIPTION kNOW YOUR CHARGER (Fig. 1) WARNING! The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
OPERATION HOW TO CHARGE THE BATTERY PACk (Fig.2) NOTE: The battery pack is shipped Fig. 2 partially charged. Before using it the first time, fully charge the battery pack. A fully discharged battery pack will charge about 45-75 minutes (depend on the type) in a desired surrounding temperature.
Page 9
CHARGING A HOT BATTERY PACk If the battery pack is above normal temperature range, the red LED will be lit and the green LED will be off. When the battery pack cools down to approximately 122°F(104°F for NiCad battery), the charger will automatically begin charging.
MAINTENANCE WARNING! Always wear safety goggles or safety glasses with side shields when using compressed air to clean tool. If the operation is dusty, also wear a dust mask. WARNING! To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.
WARRANTY If, during normal use, this MASTERFORCE power tool breaks or fails due to a defect in material or workmanship within three years from the date of original purchase, simply bring this tool and its sales receipt back to your nearest Menards retail store for a free equivalent replacement within those ®...
Need help?
Do you have a question about the FlexPower 252-8036 and is the answer not in the manual?
Questions and answers