Make Gas Connection - KitchenAid FREESTANDING OUTDOOR GRILL Installation Instructions And Use & Care Manual

Attach Left Side Shelf
1. Unpack left side shelf.
2. Open grill lid.
3. Remove 3 screws from the side of the side shelf.
4. Loosen 2 screws on the grill side panel but not remove
them completely and remove 1 screw on the grill control
panel.
A
A. Grill control panel screws
B. Grill side panel screw
5. Attach the top of the side shelf to the grill (B) by inserting
the 3 screws removed in Step 3 into the side shelf from
inside the grill hood and tighten. See illustration in Step 7.
6. Attach the bottom of the side shelf to the side panel (A) of
the grill by tighten the 2 screws loosen on the grill side
panel in step 4. See illustration in step 7.
7. Attach the side shelf to the control panel (C) by inserting
the screw removed from the grill control panel in step 4.
Tighten the screw.
A
B
B
C
Complete Assembly
1. Replace the grill grates.
2. Place warming shelf on brackets as shown.
A
A. Warming shelf bracket
B. Warming rack
Attach Cart Basket
1. Remove 2 screws on the side panel and 2 screws on
the bottom panel.
2. Attach basket to the side panel and bottom panel by
using the screws removed in step 1.

Make Gas Connection

NOTE: If grill is to be converted to Natural gas, follow
instructions in the "Gas Conversions" section.
20 lb LP Gas Fuel Tank
B
15