Slave Mode - PROEL PLLEDRB4 User Manual

occupy 3 channels so that you have 5 channels to have the whole
projector's control.
CH.
1
2
3-5

SLAVE MODE

This function mode is utilized so that the projector synchronously works
with the projector in master mode which is connected by a DMX cable.
For all installation, having long signal
cables or in the presence of electrical
noise, for example a discotheque, it is
recommended practice to use a DMX
terminator: this assist in preventing
corruption of the digital control signal
by external noise.
The DMX terminator is simply an XLR connector with a 120Ω (Ohm)
resistor connected across pins 2 and 3, which is then plugged into the
DIGITAL THRU socket on the last projector in the chain.
EFFECT
DIMMER
STROBO
SPOT 1 +
SPOT 2 +
SPOT 3 +
SPOT4
18