Wiring And Connections; Connecting The Accessories - Clarion CZ102 Owner's Manual

7) Wiring and Connections

Black
Black
Black
Black
Steering wheel
control terminal
Antenna
(Black)
Refer to next page
White
Rear audio output (Left) /
Subwoofer output 1
Red
Rear audio output (Right) /
Subwoofer output 2
2 Channel Amplifier
16-Pin Connector Extension Lead
(attached to the source unit)
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Yellow wire (Memory back-up lead)
Purple
Rear Right
Purple/Black
Green Red wire (Power lead)
Rear Left
Green/Black
4-Speaker system
Blue/White wire(Amplifier turn-on lead and Auto antenna lead)
• Connect to remote turn-on lead of amplifier
or
•
Connect it to the car power supply terminal for antenna
2-Speaker system
Black wire (Ground lead)
Gray
Front Right
Gray/Black
Orange/White wire (Illumination lead)
White
Front Left
White/Black
Purple
Purple/Black
Green
Not used.
Green/Black
Insulate each wire

8) Connecting the Accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 2 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
Connect directly to battery
Fuse 15A
Accessory 12V
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
12