Device complying with the requirements of directives 2004/108/CE (ElectroMagnetic Compatibility) and 2006/95/CE (low voltage safety) Because of changes in standards and equipment, the characteristics given in the text and the illustrations of this document are not binding unless confirmed by Delta Dore.
Time setting Setting the temperatures Each zone has its own outdoor temperature control: - zone 1 also has room temperature control incorporated into the room unit, Set the - zone 2 is controlled only by the outdoor temperature. knob to In most cases, this zone will also feature thermostatically controlled valves.
(from 5°C to 30°C). DELTA 200 has an anti-seizing function. It switches the circulator on for 3 The value is confirmed when no buttons are pressed seconds if it has not operated within the previous 24 hours (useful when for 3 seconds.
The unit follows the program for both zones. for both zones. Set the knob At the end of this period, Delta 200 reverts back to its initial operating to AUTO. mode. To programme this mode, refer to the section on programming.
Comfort mode, for example. In both zones: - by changing the position of the Delta 200 selector. To confirm that your TYPHONE 500 is compatible with the DELTA 200, please call us on +33 (0)2 72 96 03 39. - 10 -...
6. Mains fault in progress 7. Technical fault in progress In the following cases, the heating/alarm combination must be authorised when the Delta 200 is set up (C16 = 0). Maintenance By default, the combination is not authorised. On the AUTO position only:...