Hyundai ImageQuest Q320 User Manual page 72

Using a Memory Card
1. Insert a memory card or USB memory into Slot 1/2 or USB port.
2. Press to power on.
3. Press to select Memory Mode.
4. Refer to icons listed below menu screen to manipulate.
CAUTION !
When you are going to remove the memory card, press the
button on the remote control. You can go back to the
initial screen anytime to remove the memory card safely
while keeping the damage to stored data to a minimum level.
If you have pressed the EXIT button, you have to remove and
then insert the memory card or turn the power off and on to use
the memory card. Otherwise, a message No device will
appear when selecting.
Only one memory card is allowed for each slot.
Shifting into Memory Mode
Memory Mode allows you to play back photos, music, movies and motion pictures files that are stored in memory
cards.
When selecting a slot into which no memory card is inserted, a message, No device will appear.
Move one of the slots you want.
69
The initial screen of the memory mode will appear.
Memory Card Slot 2 (CF)
Memory Card Slot 1 (MT)