Printer Control Panel - Konica Minolta magicolor 2500W Technical Manual

The magicolor 2500W has six LEDs that
indicate printer and consumable status.

Printer Control Panel

The magicolor 2500W has six LEDs (Ready, Error, Y, M, C, and K) that
indicate printer and consumable status.
Ready Error
Off Off
On Off
On On
Rapid Blinking Off
Blinking Off
Slow Blinking Off
On Slow Blinking
On Blinking
On Rapid Blinking Rapid Blinking Not a KONICA MINOLTA
magicolor 2500W Cancel Button
Press and hold the Cancel button on the magicolor 2500W for more
than 5 seconds to cancel the current job. Press the Cancel button for
less than 5 seconds to continue a print job after loading media or
addressing an error message, to print the back of the page during
manual duplex printing, or to reset the printer after replacing a toner
cartridge,
magicolor 2500W Rotate Toner Button
Press the Rotate Toner button once on the magicolor 2500W to move
the cyan toner cartridge into position for replacement. With each
additional press of the button, the black, yellow, and then magenta toner
cartridge move into position, so that they can be replaced.
24
Toner Condition
Power off
Ready to print
Initializing/Canceling a
job
Warming up/Calibrating
Processing data/
Printing
Energy Saver mode
Drum cartridge near
end of life
Drum cartridge end of
life
toner cartridge
Slow Blinking Toner cartridge near
empty
On Toner cartridge empty
Rapid Blinking Toner cartridge is ready
to be replaced