Axis 2120 User Manual page 63

AXIS 2120 User's Manual
3. Log on as root with the root password
4. Change to the correct directory within the AXIS 2120 by entering the following command:
cd /etc/httpd/html
5. For binary storage of the files (not absolutely necessary, although good practice), type
6. Upload your html files by entering:
put <filename.html>
7. Start your browser and view the Web pages you have now uploaded, by entering the following
URL in the location/Address field:
http://<camera ip address>/local/<filename.html>
Example:
http://172.21.1.200/local/index.html
The images are now updated in your browser.
Note:
You can change the html files as and when you like, but remember that the available flash mem-
ory is limited.
8. Enter in the command window to exit the ftp program.
bye
Creating a New Home Page
Having created and stored your new custom Web pages in product memory, you then proceed to
assign one of these pages as your default Home page in the AXIS 2120, as described below:
Caution!
Adding a new Web page to your AXIS 2120 is not something that should be undertaken lightly.
Remember: Axis does not support the personalization of product Web pages and strongly recom-
mends that inexperienced users DO NOT perform such modifications.
1. Start a new ftp session to the AXIS 2120, by entering:
ftp <camera ip address >
2. type
bin
3. Navigate your way to the appropriate directory, entering:
cd /etc/httpd/conf/
Appendix E - Custom Web Pages
.
pass
63
bin