Axis 2120 User Manual page 13

AXIS 2120 User's Manual
Notes:
•In Windows you can find out the IP address of your workstation by running
95/98) or
ipconfig
•See also Alternative Methods of Assigning the IP Address, on page 15.
Connect an Ethernet cable
Connect an Ethernet cable to your AXIS 2120 and
attach it to the network.
Attach the external Power Supply
Attach the external Power Supply to the unit
and connect it to your local power supply.
Wait for ARP reply and check Network
indicator
Approximately 10-15 seconds after connecting the power
supply, the message '
or similar, is returned in the window. Ensure that the
Power Indicator is permanently lit and that the Network
Indicator flashes intermittently.
Exit ping and check the installation.
The installation is now complete, and you are
now ready to access the AXIS 2120 from your
Web browser, as described in the next section...
(Win NT/2000) from the command line.
Reply from 172.21.1.200...
Installing Your Camera on a Network
' -
Power Indicator
(Win
winipcfg
Network Indicator
13