MartinLogan Vanquish User Manual page 7

same color to the (+) terminal on both the
speaker and the amplifier.
WARNING! Turn your amplifier
off before making or breaking any
signal connections!
6 Place speaker in hole. Orient the specially
marked woofer so it is the closest to the listen-
er's ear level at the primary listening position.
7 Use a 2-inch long #2 Phillips driver and
an electric drill to lock all mounting locks in
place. Use a low clutch setting on the drill.
8 Remove the protective cover from the tweeter
9 The Folded Motion XT tweeter should always
be used in a vertical orientation. To do this,
use your fingers to gently pull the tweeter
assembly away from the speaker, rotate 90
degrees, and press it back into place (fig 7).
10 Gently press the glossy trim baffle into place.
Remove the protective film from the trim.
11 Place the magnetic grill cover over the speaker.
Fig. 8 Axis
Fig. 7
Fig. 9 Edge
7