Step 1-2: Cpu Installation - Gigabyte GA-8EGXDR User Manual

GA-8EGXDR Motherboard

Step 1-2: CPU Installation

Pin1 indicator
CPU Top View
Socket Actuation Lever
1. Pull the lever out, than lift up the Lever.
3. Press down the CPU socket
lever and finish CPU installation.
M Please make sure the CPU type is supported by the motherboard.
M If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
M Warning: If your install one CPU ON LY, please refer to the Motherboard
Layout (page 7) to install the CPU 1 frist.
M Note that if you insall two CPUs, please install the same speed CPUs.
CPU Bottom View
Pin1 indicator
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
10