Step 1: Install The Central Processing Unit (Cpu); Step 1-1: Cpu Installation - Gigabyte GA-8PEMT4 User Manual

Step 1: Install the Central Processing Unit (CPU)

Step 1-1: CPU Installation

Angling the
rod to 65
1. Angling the rod to 65-degree may be feel
a kind of tight , and then continue pull
the rod to 90-degree when a noise "cough"
made.
Pin1 indicator
3. CPU Top View
M Please make sure the CPU type is supported by the motherboard.
M If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
0
2. P ull the rod to the 90-degree
directly.
Pin1 indicator
4. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
- 9 -
Socket
Actuation
Lever
Hardware Installation Process