Lubrication - Alamo UNDER THE GUARDRAIL Operator's Manual

This safety alert symbol is used to point out areas requiring precautions for your safety. Failure
to observe these warnings could result in injury to you. DO NOT attempt to make adjustments
with the mower or tractor running!
For continued good cutting and trouble-free operation, it is important to follow these instructions accurately.

LUBRICATION

Shut off the tractor engine and remove key before lubricating the mower.
Greasing: Wipe dirt from grease fittings and grease gun nozzle before greasing. Replace missing or damaged
grease fittings immediately. Use a good grade of lithium based #2 grease where grease fittings are provided. Do
not over-lubricate. Stop as soon as clean grease emerges from the joint, unless noted other wise below.
Lubrication Point
1. Carriage Subframe Pin
2. Carriage Pivot Pin
3. Breakaway Pivot Pin
4. Spindle Assembly
UGM 06/03
© 2003 Alamo Group Inc.
MAINTENANCE
Frequency
Daily
Daily
Daily
Daily
3
Maintenance Section 5-2
1
4
2