When To Change The Thread Catcher Of The Standard Floor Brush; How To Change The Thread Catcher - Miele S 8000 Operating Instructions Manual

When to change the thread
catcher of the standard floor
brush
The thread catcher on the standard
floor brush can be replaced
when the pile is worn out.
How to change the thread
catcher
AllTeQ floor tool
^ With a screwdriver, for example, lift
the thread catcher out of the slots.
Two indents are provided for this
purpose.
^ Insert the new thread catcher.
AirTeQ floor tool
^ With a screwdriver, for example, lift
the thread catcher out of the slots.
^ Insert the new thread catcher.
New thread catcher pads can be
purchased from any authorized Miele
vacuum dealer or Miele.
Cleaning the floor roller
(not required with the AirTeQ floor tool)
a Release the roller pin using a coin.
b Push and take out the roller axle.
c Take out the roller.
^ Remove all threads, hair etc. and
reinstall the roller and lock the roller
pin.
Maintenance and care
33