Assembly - Mark Of Fitness XM-4434 Owner's Manual

Assembly

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
C1
4
A2
A1
B1
C1
9
A1
2
C1
A2
A2
STEP 1
Place the Left and Right Base (1 & 2) parallel to each other. Connect the
Bottom Brace (9) to the Left and Right Base (1 & 2). Secure them with four
M10x70 Bolts (A2), and four M10 Nylon Locknuts (C1).
Insert the two Lower Upright Tubes (6) into the Left and Right Base (1 & 2).
Secure them using eight M10 x 20 Bolts (A1) and eight Washers D10 (B1).
Insert the Lower Support Bars (4) between the Base (1 & 2) and the Lower
Upright Tubes (6). Secure them with four M10 x 70 Bolts (A2) and four M10
Nylon Locknuts (C1).
5