Assembly - Mark Of Fitness XM-4434 Owner's Manual

Assembly

Hardware Identifier
See the drawings below to identify the hardware used in the assembly. The number in paren-
theses is the reference number of the part.
Note: Some hardware may be pre-installed in some parts.
M10 Nylon Locknut (C1)
M10 Washer (B1)
M8 Washer (B2)
M10 x 20mm Bolt (A1)
M8 x 40mm Bolt (A5) M10 x 55mm Bolt (A3)
M10 x 70mm Bolt (A2
)
M8 x 70mm Bolt (A4)
4