Presetting Stations Automatically; Tuning To Preset Stations; Iphone/Ipod - Alpine iDA-X305 Owner's Manual

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
"Auto Memory" is displayed while the automatic memory is
in progress. The tuner will automatically seek and store 6
strong stations in the selected band. They will be stored 1 to
6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press (PRESET).
The Preset screen is displayed.
3
Rotate the Double Action encoder to select a
radio station.
4
Press /ENTER.
The display shows the band, preset number and frequency
of the station selected.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
another band.
FM-1 FM-2 AM
You can also change the desired radio band by pressing BAND.
FM-1

iPhone/iPod

SOURCE
Double Action encoder
/ENTER
/
When an iPhone/iPod is connected to the iDA-X305 by using the proper
cable, the controls on the iPhone/iPod are not functional.
• Internet or telephone functions, etc., of the iPhone or iPod touch are
not controllable from the unit, but these functions can be controlled
using the iPhone or iPod touch itself.
• If you connect an iPhone to the iDA-X305, it can be used as an iPod.
If you use iPhone as a hands-free phone, you need the optional
Bluetooth INTERFACE (KCE-400BT).
• This unit does not support the iPod FULL SPEED
Therefore, even if you connect an iPhone/iPod using the FULL
™
SPEED connection cable (KCE-433iV) on the Bluetooth
INTERFACE (KCE-400BT), you cannot operate the iPhone/iPod.
• This unit does not support iPhone/iPod's video playback function.
About iPhones/iPods usable with this unit
• This unit can be used with the following iPhone/iPod versions.
Correct function of earlier versions cannot be guaranteed.
iPhone 3G : Ver.2.0.2
iPhone : Ver.2.0.2
iPod touch : Ver.2.0.2
iPod classic : Ver.1.1.2
iPod with video : Ver.1.3
iPod nano (3rd generation) : Ver.1.1.3
iPod nano (2nd generation) : Ver.1.1.3
iPod nano (1st generation) : Ver.1.3.1
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The usage of iPod shuffle with this unit is not supported.
VIEW
(FUNCTION/SETUP)
™
connection.
9
-EN