Key Functions - Horizon Fitness Eclipse Installation And Operation Manual

Key functions

1. Power Key
indicator light must be on indicated unit is plugged in and has power to it. Press
the on/off button, and the machine will start running (Two Beeps). Press this key again,
the machine will stop running (Single Beep). The display will read room humidity levels
except while you're adjusting the setpoint humidity level. NOTE: When unit is turned off,
the fan will run for 1 minute prior to shutting off.
2. Increase Humidity button
Press this button to set indoor humidity
80%. When the indoor humidity is lower than the set humidity, the machine will stop
automatically. When indoor humidity is higher than setpoint, the unit will operate.
3. Decrease Humidity button
Press this button to set indoor humidity
45%, 40%. When the indoor humidity lower than set humidity, the machine will stop
working automatically. When the indoor humidity is higher than setpoint, unit will
operate.
, according to this sequence: 60%, 65%, 70%,
, according to this sequence: 60%, 55%, 50%,
5