Cleaning The Filter - Horizon Fitness Eclipse Installation And Operation Manual

Horizon series
Table of Contents

Advertisement

Cleaning/Disinfecting Options:
Basic-
1. Press drain button to drain water from reservoir.
2. Disconnect power to dehumidifier.
3. Pour a 16 oz solution of either 1 oz bleach to 15 oz water or 4 oz white vinegar to 12
oz water into the drain tray at the base of the coils.
Note: If you get any cleaning solution on the coils, flush with
water.
4. Allow to soak for 15 minutes.
5. Reconnect power to dehumidifier.
6. Fill reservoir and flush/cycle pump at least two times.
7. Repeat if needed or refer to Advanced instructions.
Advanced-
1. a.Use manual drain button, to drain water from reservoir.
b.Unplug the dehumidifier and remove cover to access pump
c.Pump head can be removed from reservoir by pressing on tabs
d.A wet-dry vacuum or towels can be used to remove remaining water from
reservoir
2. Fill pump reservoir with a diluted cleaning solution (15 oz water to 1 oz bleach or 12
oz water to 4 oz white vinegar).
3. Reassemble pump and use manual pump button to flush mixture through discharge
tubing.
4. Pour same diluted mixture slowly into drain pan under evaporator coil and allow it to
clean hose from pan to pump.
energizes 1 time.
Note: If you get any bleach/water mixture on coils, flush with
water.
5. Pour sufficient clean water through drain pan to force pump to activate twice.
6. Reassemble unit and return it to operational status.
Coil-
If necessary, clean your coils with a vacuum or approved coil cleaner.
Cleaning the machine body
Use soft damp cloth to clean exterior of unit. No solvents should be used.

Cleaning the Filter

1. Unplug the unit.
2. Disassemble the filter mesh
This process can be stopped when the pump
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents