4.5.6
Clean milk system manually
Scalding hazard
• If a beverage is initiated accidentally, there is
a hazard of being injured.
> Always switch off the coffee machine using the
ON/OFF button prior to cleaning.
> Disconnect mains plug.
Pull the lever on the right, next to the combi spout
Remove combi spout
Remove milk hose from milk container and release from
combi spout
Release the mixer hose (if present)
Mix 5 ml of WMF Special cleaner with 0.5 litre of
lukewarm drinking water
Health hazard in case of eye contact
• In case of eye contact, the WMF milk system
cleaner can cause severe eye injury.
> Ensure that the milk system cleaner never
makes contact with the eyes of a person or
animal.
Dismantle combi spout
Immerse one end of the milk hose in the cleaning
solution
Immerse the length of the remaining milk hose in the
cleaning solution
This procedure prevents air bubbles from remaining in the
milk hose.
Place all parts of combi spout in the cleaning solution
(3 parts)
All parts must be completely immersed in the cleaning
solution.
After 5 hours, clean all the parts thoroughly with
a brush
Rinse combi spout and milk hose very thoroughly with
clear drinking water
Thoroughly rinse the mixer hose (if present)
Insert the mixer hose
User Manual WMF 8000 S
Care | Manual cleaning
CaUtion
Observe the Safety chapter
w s tarting on page 63
Instructions as animation
w C offee machine
w M ain menu w C are
w I nstructions
CaUtion
Observe the Safety chapter
w s tarting on page 63
51