+
X7721r/X7721r
User's Manual
Version 1.0
3.4.4.3
Intrusion Detection
Intrusion detection can be defined on any interface with an external
endpoint.
To configure firewall intrusion detection, choose the Configure
Intrusion Detection link.
Firewall intrusion detection can be configured only if Intrusion
Detection is enabled in the Security State section.
You will then see the following screen:
Enter values into the table to set conditions for intrusion
detection.
If Use Blacklist is set to true, clicking on the Clear Blacklist
button will clear the blacklist.
Click on the Apply button to save the settings.
- 50 -