XAVI Technologies Corp. X7721r User Manual page 47

+
X7721r/X7721r User's Manual
Version 1.0
Add Raw IP filter
Enter the criteria for the port filter into the table.
Default values for "allow" criteria will allow all traffic to pass (as
shown in this example).
Default values for "block" criteria will block all traffic.
Enter the IP Protocol that the security interface will allow.
Filter criteria for source and destination IP addresses and subnet
masks define the values that will be allowed by the "allow" filter,
and define the values that will be blocked by the "block" filter.
Filter criteria for source and destination IP address and subnet
mask do not override IP protocol criteria, but add additional
criteria for the port filter.
Click on the Apply button to return to the list of defined port
filters.
To delete a port filter, click on the Delete button of the
corresponding row of the port filters table.
- 47 -