+
X7721r/X7721r
User's Manual
Version 1.0
3.4.4.1
Security Policy Configuration
To add a new security policy, choose the Security Policy
Configuration link, and then choose the New Policy link on the
next screen. You will then see the following screen:
Choose the types of interfaces from the menus between which
you would like to configure the security policy.
Choose whether the validators (selection criteria) will serve to
block or allow traffic.
Click on the Apply button. You will then see the following screen:
To configure a new policy, click on the Port Filters link and/or
the Host Validators link in the Current Security Policies table.
To delete a security policy, click on the Delete button in the
corresponding row of the Current Security Policies table.
- 45 -