Rear Panel - Yaesu SP-2000 Operation Manual

Rear Panel

INPUT 1 / INPUT 2 Jack
These jacks accept input from two FT-2000 transceivers.
The front panel INPUT switch selects either jack 1 or
jack 2. When the connecting cable is inserted into the
EXT SPKR jack on the FT-2000 transceiver, the trans-
ceiver internal speaker will be muted.
This jack is gold plated, for outstanding audio performance.
LINE OUT Jack
This is an audio output jack that may be used for tape
recording or connection to other audio devices.
Audio output from this jack is conditioned by the settings
of the audio filters.
Audio output from this jack is also affected by the
transceiver's AF GAIN
control(s), so you may adjust
the FT-2000 AF GAIN
level.
This jack is gold plated, for outstanding audio performance.
control for optimum output