Table of Contents
Advertisement
Rear video camera lens options
When using the rear camera lens, the quick menus on the left side of the
screen are:
•
Flash
- Sets the flash to
will be displayed on the viewfinder.
•
Swap camera
camera lens.
•
Recording mode
Normal or Live effect. Tap the icon
Recording mode screen to view definitions for each of these modes.
•
Settings
- Opens the video camera settings menu.
NOTE
When using the front lens to record video, the quick menus on the left side of the
screen are Swap camera
setting when using the front camera lens to record video.
The following options are available to optimize your video recording when
you tap the Settings icon
•
Video size
from FHD 1920x1080 (30fps), HD 1280x720, QVGA 320x240 (MMS), and
QCIF 176x144 (MMS).
NOTE
The default resolution is FHD 1920x1080 (30fps).
•
Brightness
lens. Slide the brightness indicator along the bar toward "-" for a lower
brightness image or toward "+" for a higher brightness image.
•
White balance
qualities of the video under different lighting conditions. Choose from
Auto, Incandescent, Sunny, Florescent, and Cloudy.
•
Color effect
Mono, Sepia, and Negative.
•
Geotagging
video. This is ideal for geotagging purposes. Choose Off or On.
•
Volume key
Zoom.
(On),
- Swaps between the rear camera lens and front
- Defines how the video will be recorded. Choose
, Recording mode
on the viewfinder screen:
: Sets the resolution (video size) for the video. Choose
: Defines and controls of the amount of light entering the
: Defines the ambient lighting to improve the color
: Applies artistic effects to videos. Choose from None,
: Sets the camcorder to add location information to the
: Set how to use the Volume Key. Choose Record or
(Off), or
(Auto). The flash icon
in the lower-left corner of the
, and Settings
Entertainment
. There is no flash
123
Advertisement
Table of Contents
