Table of Contents
Advertisement
•
Brightness
lens. Use the slider bar to increase or decrease image brightness.
•
Image size
(4:3).
•
White balance
qualities of the photo under different lighting conditions. Choose from
Auto, Incandescent, Sunny, Fluorescent, and Cloudy.
•
Color effect
Mono, Sepia, and Negative.
•
Timer
: Sets a delay timer for the camera. Choose from Off, 3 sec, 5
sec, and 10 sec.
•
Save as flipped
it was taken (landscape or portrait). Choose Off or On.
•
Geotagging
picture. Choose Off or On.
•
Shutter sound
Tone 1, Tone 2, Tone 3, Tone 4, and Off.
•
Volume key
Zoom.
•
Storage
: Sets where your pictures are saved. Choose SD card or
Internal storage.
•
Help
: Tap to open the Camera help guide.
•
Reset
: Tap to reset to the default settings.
Taking a quick photo
1. Open the Camera app and point the lens toward the subject you want to
photograph.
2. Touch the subject on the screen and a focus box will appear in the
viewfinder. When the focus box turns green, the camera has focused on
your subject.
3. Tap the Capture button
NOTE
You can zoom up to 4 times while taking a picture. Place two fingers on the screen and
spread them apart to zoom in (a zoom bar indicates the zoom level) and pinch in to zoom
back out.
: Defines and controls the amount of light entering the
: Defines the resolution for the photo as VGA 640x480
: Defines the ambient lighting to improve the color
: Applies artistic effects to pictures. Choose from None,
: Sets the camera to save the image in the orientation
: Sets the camera to add location information to the
: Sets the shutter sound for the camera. Choose from
: Sets how to use the Volume Key. Choose Capture or
to take the picture.
Entertainment
119
Advertisement
Table of Contents
