Table of Contents
Advertisement
BP7332-2 CF930 Atomical
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX
!
OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
Trouble Shooting Ceiling Fan
TROUBLE
1. Fan will not
start.
2. Fan sounds
noisy.
3. Fan wobbles
excessively.
9/23/10
3:29 PM
Page 15
PROBABLE CAUSE
1. Fuse or circuit breaker
blown.
2. Loose power line
connections to the fan.
3. Code switches in remote
control receiver and Fan/Light
Wall Control are not set in the
same position.
1. Blades not attached to fan.
2. Screws securing fan blades
to motor are loose.
3. Loose screws in motor housing. 3. Check to make sure all screws
1. Setscrews in motor coupling are 1. Raise coupling cover and tighten
not tightened securely.
2. Setscrew in the hanger ball/
downrod assembly is loose.
3. Screws securing fan blades
to motor are loose.
4. Fan blades are not seated
properly.
5. Hanger bracket and/or ceiling
outlet box is not securely
fastened.
6. Fan blades out of balance.
15
SUGGESTED REMEDY
1. Check main and branch
circuit fuses or circuit breakers.
WARNING: Make sure
!
main power is turned off.
2. Check line power connections
to fan.
3. Check that both code switches
are set in the same positions.
1. Attach blades to fan before
operating.
2. Check to make sure the screws
which attach the blades to the
motor are tight.
WARNING: Make sure main
!
power is turned off.
in motor housing are snug
(not over-tight)
setscrews securely.
2. Tighten the setscrew in the
hanger ball/downrod assembly.
3. Check to be sure screws which
attach the fan blade to the
motor are tight.
4. Check to be sure that the
screws securing the fan
blades seat firmly.
5. Tighten the hanger bracket
screws to the outlet box, and/or
secure outlet box.
6. Interchanging an adjacent (side
by-side) blade pair can
redistribute the weight and result
in smoother operation.
Or use supplied balancing kit to
balance blades.
UL Model No.: CF930
Advertisement
Table of Contents
