Settings For The Sound (Audio Setup) - Sony DVP-NS700P Operating Instructions Manual

Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the
sound according to the playback and
connection conditions.
Select "AUDIO SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 67).
The default settings are underlined.
WAUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
-LINE OUT (AUDIO) l/2 jacks
Turns off the audio attenuation.
Normally, select this position.
Reduces the audio output level so that
Select this when the playback sound
from the speakers is distorted.
WAUDIO DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the AUDIO DRC function. This affects the
output from the following jacks:
-LINE OUT L/R (AUDIO) l/2 jacks
-DIGITAL OUT (OPTICAL or COAXIAL)
jacks only when "DOLBY DIGITAL" is set
to "D-PCM" (page 75).
STANDARD Normally, select this position.
TV MODE Makes the low sounds clear
even if you turn the volume
down. It is especially
recommended when you listen
to the sound using the speakers
of the TV.
WIDE
RANGE
Gives you the feeling of being at
a live performance. When you
use high quality speakers, it is
even more effective.
n DOWNMIX (DVD only)
Switches the mixing down methods when
you play a DVD on which rear signal
components such as LS, RS, or S are
recorded in Dolby Digital format. For details
on the rear signal components, see
'Changing the Sound" (page 49). This
function affects the
output of the following
jacks:
-LINE OUT L/R (AUDIO) l/2 jacks
-DIGITAL OUT (OPTICAL or
COAXICAL) jacks when "DOLBY
DIGITAL" is set to "D-PCM" (page 75).
i
IOLBY Select this when the player is
3JRROUND connected to an audio
component that conforms to
Dolby Surround (Pro Logic).
The output signals which
reproduce the Dolby Surround
effect are downmixed to 2
channels.
\JORMAL Select this when the player is
connected to an audio
component that does not
conform to Dolby Surround
(Pro Logic). All of the output
signals are downmixed to 2
channels without the Dolby
Surround (Pro Logic) effect.
74