Sony DVP-NS700P Operating Instructions Manual page 27

Press IF/+ to select the item, then press ENTER.
l
When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
l
When "DIGITAL OUTPUT" is selected, the Setup Display for "DOLBY DIGITAL"
appears. Proceed to Step
q
.
Press W to select the item.
Choose the item that matches the audio connection you selected in page 22 to 24 (m
through e ).
z
%
Audio Cord Connection Type
You select
Page
D-PCM
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder)
75
15
Press ENTER.
DTS is selected.
Press W to select the item.
Choose the item that matches the audio connection you selected in page 22 to 24 ((I)
through e).
Audio Cord Connection Type You select
Page
am
OFF 15
(Q
ON (only if the amplifier/receiver 75
has a DTS decoder)
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under "SETUP" in the Control Menu (page 67)
continued -
27