This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 24.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use m.
If your amplifier
(receiver) has a digital input jack, use m.
WRecommended surround sound effects using this connection with your amplifier (receiver)
*Dolby Surround (Pro Logic) (page 79)
'p For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
Optical digital cord -
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
Dolby Surround amplifier (receiver)
d:
Signal flow
* When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
continued1
23