3Com OfficeConnect 3CRWDR200A-75 User Manual page 132

132 C : G
HAPTER LOSSARY
PPPoE Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a method
of data transmission originally created for dial-up connections; PPPoE is
for Ethernet connections.
PPTP Point-to-Point Tunneling Protocol is a method of secure data transmission
between two remote sites over the internet.
QoS QoS stands for Quality of Service. QoS is a generic name for a set of
algorithms which attempt to provide different levels of quality to different
types of network traffic.
RIP Routing Information Protocol. RIP allows an administrator to set up
routing information on one RIP enabled device, and have that routing
information replicated to all RIP enabled devices on the network.
RJ-45 A standard connector used to connect Ethernet networks. The "RJ"
stands for "registered jack".
Server A computer in a network that is shared by multiple end stations. Servers
provide end stations with access to shared network services such as
computer files and printer queues.
SPI Stateful Packet Inspection. This feature requires the firewall to remember
what outgoing requests have been sent and only allow responses to
those requests back through the firewall. This way, un-requested
attempts to access the network will be denied.
SSID Service Set Identifier. Some vendors of wireless products use SSID
interchangeably with ESSID.
SNMP Simple Network Management Protocol. It is used by network
management systems to communicate with network elements.
Subnet Address An extension of the IP addressing scheme that allows a site to use a single
IP network address for multiple physical networks.
Subnet mask A subnet mask, which may be a part of the TCP/IP information provided
by your ISP, is a set of four numbers configured like an IP address. It is
used to create IP address numbers used only within a particular network