Restoring Your System; Restoring Your System To Factory Default Settings; Restoring Your System To Your Own Backup System; Image - BenQ Joybook Lite User Manual

2. Click the button to select
3. In Windows XP, to create a restore point manually, key in the
description of the restore point and follow the remaining
on-screen instructions to add a new restore point.

Restoring your system

The Restore feature helps to bring your Joybook Lite back to its
factory default settings or to an earlier state. In order to restore,
you need to back up your system drive, or create a restore point
first.
Should your system become unstable or damaged, try to recover
your system with the restore solutions provided in this
functional module.

Restoring your system to factory default settings

QDataTrove allows you to restore your system drive (C: drive)
to the factory default configuration.
1. In QDataTrove, click the
Restore
2. Click the button to select
Factory Default Settings
3. A dialog box asking whether you wish to adjust the size of
disk partition appears.
• If you select "Yes", all programs you installed or data you
saved on both the C: drive and the D: drive will be erased.
• If you select "No", all programs you installed or data you
saved on the C: drive will be erased. However, data on the
D: drive will not be affected.
4. Follow the remaining on-screen instructions to complete the
operation.
Create a Restore Point
tab.
Full System Restore -
.
Restoring your system to your own backup
.
system image
QDataTrove allows you to restore your system drive (C: drive)
to a previous state with your own backup system image.
To perform this operation, a backup system image file is
required. For details about making your own backup system
image, refer to
page 37 or "Backing up your system into a disc" on page
1. In QDataTrove, click the
2. Click the button to select
Backup Image
3. An dialog box appears. Browse to select a backup
Open
system image, and then click
4. A confirmation message appears. To proceed with the
operation, click
5. Follow the remaining on-screen instructions to complete the
operation.

Restoring your system from a restore point

QDataTrove allows you to restore your system drive (C: drive)
to previous states by restoring from a list of restore points (if
available).
To perform this operation, a restore point is required. For
details about manually creating a restore point, refer to
"Creating a restore point" on page
1. Click the button to select
.
Point
Recovering your system using QDataTrove
"Backing up your system into a single file" on
tab.
Restore
Full System Restore -
.
.
Open
.
Yes
38.
Restore from a Restore
38.
39