Windshield Washer Fluid - GMC T-Series 2007 Owner's Manual

If either light remains on after you have added
power steering fluid to the proper level, then shut off
the engine for 10 seconds. This should reset the
brake warning lights. If one or both lights stay on
though, see "Hydraulic Brake System Warning
Lights" under Brake System Warning Light on
page 124 for more information.
What to Use
To determine what kind of fluid to use, see
Part C: Recommended Fluids and Lubricants on
page 321.
Notice: When adding power steering fluid or
making a complete fluid change, always use the
proper fluid. Failure to use the proper fluid can
cause leaks and damage hoses and seals.
226

Windshield Washer Fluid

What to Use
When you need windshield washer fluid, be sure
to read the manufacturer's instructions before
use. If you will be operating your vehicle in an area
where the temperature may fall below freezing,
use a fluid that has sufficient protection against
freezing.
Adding Washer Fluid
The reservoir is located behind the front panel on
the driver's side of the vehicle.
Open the cap with the
washer symbol on it.
Add washer fluid
until the tank is full.