GMC T-Series 2007 Owner's Manual page 108

Setting Cruise Control
J
SET: Press this button at the end of the
multifunction lever to set the cruise control speed.
+ RES: Move the band to this position to
resume the set speed.
108
This button is located at
the lower left side of the
instrument panel. It
turns the cruise control
on and off.
CAUTION:
{
If you leave your cruise control on when
you are not using cruise, you might hit a
button and go into cruise when you do
not want to. You could be startled and
even lose control. Keep the cruise control
switch off until you want to use cruise
control.
J
1. Press the button to turn the cruise control
on. The light inside the switch will turn on.
2. Get up to the speed you want.
J
3. Press in the SET button at the end of the
lever and release it.
4. Take your foot off the accelerator pedal.