LG LED 500 Owner's Manual page 47

Setting
Picture
Restores the options of each mode to the factory default.
Reset
Aspect
Changed the image size to view images at its optimal size. (see page22)
Ratio
Picture
By following the instructions, using the remote control, you can eas-
Wizard II ily adjust the picture quality to technical standards without needing an
expensive pattern device or a picture quality expert.
Screen Adjusts the picture quality of RGB-PC input.
(RGB-PC)
Option
Resolution Available resolutions are 768 resolution (1024 x 768/ 1280
Auto
Config.
Position
Size
Phase
Reset
Advanced Control
Setting
Dynamic Con- Adjusts the contrast to keep it at the best level according to the
trast
brightness of the screen.
Dynamic Color Adjusts screen colors so that they look natural.
Clear White Makes the white area of screen look brighter and whiter.
Skin Color
Detects the skin area of image and adjusts it to render a natural skin
color.
Noise Reduc-
Reduces image noise.
tion
Digital Noise
This option reduces the noise produced while creating digital video
Reduction signals.
GAMMA
Sets a gradation curve between video input and output signal.
Black Level
Compensates the brightness and contrast of a screen to balance
with the black level of the video input.
Not available for RGB-PC.
Description
x 768/ 1360 x 768, 60 Hz) and 1050 resolution (1400 x
1050/ 1680 x 1050, 60 Hz).
Provides optimized picture quality by automatically calibrat-
ing the mismatch of horizontal width and picture shake
caused by clashes between the internal settings of the pro-
jector and various PC graphic signals.
You can also use the AUTO button on the remote control.
y y
Moves the image up/down/left/right.
Changes the screen size.
Makes the picture look clear by removing horizontal noise.
Restores all the settings to the factory default.
CUSTOMIZING SETTINGS
Description
47
(see page22)