Working With The Station Memories; Ats (Auto Tuning Storage) - Tecsun PL-398MP Operation Manual

WORKING WITH STATION MEMORIES
There are in total 550 preset memories within the unit. 100
preset memories for each FM, MW, and LW band, and 250
for SW.
METHOD 1:
FM ATS:
1. Fully extend the telescopic
antenna and then press the
[FM] button to select FM band.
2. Press & hold the [FM] button
until "PRESET " flashing and
the frequency advancing; now
the unit starts scanning and
storing all available stations
into the memories.
When the frequency stops advancing, it means the ATS
operation is done completely. You can rotate the
[TUNING] knob to search for those stored stations.
MW/LW ATS:
Press the [MW/LW] button to select MW/LW band, then
follow step 2 of FM ATS.
SW ATS:
Fully extend the telescopic antenna and press the SW[
or [ ] button to select SW band. There are two modes for
SW ATS tuning:
Mode A: Press & hold the [
within all meter bands
Mode B: Press & hold the [
within present meter band.
Notes:
1. During ATS process in FM, MW / LW or SW (mode A),
pre-stored radio stations will be replaced automatically
by the new searched stations.
12

ATS (Auto Tuning Storage)

SLEEP
Auto Tuning storage (ATS)
status
] button to ATS the stations
] button to ATS the stations
flashing
]
PL-398MP