Table of Contents
Advertisement
1
Connect the camera's DC
and BNC socket cable to the
extension cable's DC and BNC plugs
2A. Connecting Directly to TV
2
Connect a BNC to RCA
adapter and connect to video
input on your TV or VCR
INPUT
The screw-on
protective cap
The circular screw-on protective cap on the rear of the camera housing shields the OSD control panel.
To open it, use a large, flathead screwdriver and turn counter-clockwise. Beneath this you'll find the
OSD controls.
When you're done configuring the camera, ensure that the screw cap is firmly screwed back in
place, and that the weather seal is in place - if it's not, then the weatherproofing of the camera will
be compromised.
4 4 4
Connection Guide
Accessing the OSD Controls
3
Connect the extension cables
DC socket to the DC plug on
the power adapter
2B. Connecting to Your Existing DVR
2
Connect the BNC extension
cable to an open channel on
the back of the DVR
The OSD
controls
4
Plug in the camera
power adapter into
a wall socket
Advertisement
Table of Contents
