Table of Contents
Advertisement
General Recommendations
-
When unpacking avoid tipping unit more than 45 degress to preven contamination of
compressor oil colling system.
-
Do not expose the equipment to heat sources such as stoves, ovens, green houses,
hot walls and solar radiantion.
-
The equipment must be installed in a space with good air circulation and vetiltion to
maintain the performance of the freezer.
-
Not recommened to installation in areas with high relative humidity, for example, a
laudry.
-
Should be kept a minimum distance of 4 inches from the side and rear walls. If the
equipment is covered, you must also observe a distance of 4 inches at the top. The
freezer should be perfectly level to prevent damage to the refrigeration unit.
-
The freezer may not be installed in narrow corridors, only secure locations with easy
access.
4
Advertisement
Table of Contents
