Ninja ® Mega Assembly And Use For The 72 Oz. Pitcher - Ninja BL772 Owner's Manual

Assembly and Use for the 72 oz. Pitcher
Assembly
Fig. 1
Fig. 2
IMPORTANT: Make sure that the motor base
is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly
to the right of the "LOCK" symbol on the
motor base.
3 Rotate the pitcher clockwise as far as it will go
to lock in place. (Fig. 2)
4 The pitcher can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(Fig. 3a, Fig. 3b)
5 Holding the 6-Blade Assembly by the top of the
shaft, place it onto the drive gear inside the
pitcher. Ensure that the attachment is seated
properly and is standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive
gear.
BL772_30_IB_ENG_120627_2.indd 8
Fig. 3a
Fig. 3b
6 Add the ingredients to the pitcher, making sure
that they do not exceed the highest measured
marking line on the side of the pitcher.
NOTE: If you need to add additional ingredients
while the appliance is processing, open the
pour spout cap and pour the ingredients in
through the opening.
7 Plug the power cord into the electrical outlet
and press the power button ( ).
NOTE: As a safety feature, the power
button ( ) will flash and the motor will not
work if the pitcher and lid are not installed
correctly. When the pitcher and lid are
installed properly, the power button ( )
will be solid, indicating that the appliance
is ready for use.
8 Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning
the arrow ( ) located on the lid with the arrow
( ) located on the pitcher's handle. (Fig. 5)
Press the handle down until you hear a click.
Fig. 4
Fig. 5
www.ninjakitchen.com
12-06-27 12:30 PM
8