Assembly And Use For The 3 Cup Mini Prep Bowl - Ninja BL772 Owner's Manual

Assembly and Use for the 24 oz. Mini Prep Bowl
WARNING: Never leave the appliance unattended while in use.
ASSEMBLY
Fig. 1
Fig. 2
USING THE 3 CUP MINI PREP BOWL
1 Place the 64 oz. bowl onto the motor base. (See assembly
instructions on page 11.)
2
Holding the spindle by the shaft, place it onto the gear
shaft inside the 64 oz. bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 1)
3 Place the mini prep bowl aligning the spindle inside the
center post. (Fig. 2)
4 Hold the prep bowl blade by the shaft and carefully place
it over the center post of the mini prep bowl. (Fig. 3)
5 Add ingredients into the mini prep bowl.
6 Holding the lid by the handle in the upright position,
place it on top of the 64 oz. bowl aligning the arrow
( ) located on the lid with the arrow ( ) located on
the bowl's handle. (Fig. 4) Press the handle down
until you hear a click.
7
Plug the power cord into the electrical outlet and press
on the power button ( ).
13 TOLL FREE:
BL772_30_IB_ENG_120627_2.indd 13
Fig. 3
Fig. 4
1-877-646-5288
USE
Fig. 5
8 Select the speed that best suits your needs. For best
results, press the Pulse button in short intervals. (Fig. 5)
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
9 When you have reached your desired consistencey, stop
the appliance by pressing the power button ( ) and wait
for the blade to stop turning.
10 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. (Fig. 6)
11 Carefully hold the mini prep bowl blade by the shaft and
lift it out of the mini prep bowl. (Fig. 7)
12 Turn the bowl counter clockwise and then lift off the
base.
NOTE: Do not fill ingredients past the
"MAX" fill line.
REMOVAL
Fig. 6
Fig. 7
12-06-27 12:30 PM