Advertisement
ASSEMBLING & USING THE PITCHER
IMPORTANT: Review the important
safety instructions on pages 2 and 3
before proceeding.
1
Place the pitcher on a clean, dry,
level surface.
2 Holding the blade assembly by the
shaft, place it onto the spindle pin
inside the pitcher.
3 Place ingredients in the pitcher.
IMPORTANT: Always make sure the
blade assembly is in place before
adding any ingredients.
4 Place the splashguard on top
of the pitcher.
8
ninjakitchen.com
5 Place the Master Pod on top of the
splashguard, making sure it is securely
in place.
6 Plug the unit into an electrical outlet.
Hold the Master Pod securely in place
while operating. Hold the pitcher firmly
while pressing the On/Off pulse button
to ensure the unit stays in place. To
pulse, press the On/Off pulse button
located on the top of the Master Pod.
NOTE: DO NOT operate the appliance
continuously for more than 15 seconds.
NOTE: For best results, use short
pulses when pressing the On/Off
button. If ingredients stick to the sides
of the pitcher, stop the appliance,
and remove the Master Pod and the
splashguard. Use a spatula to dislodge
the ingredients, then replace the
splashguard and Master Pod. Continue
processing.
7 Stop pressing the button when desired
consistency is reached.
8 Make sure the blade assembly has
stopped completely before removing
the Master Pod.
9 Use the pour spout to empty liquid
contents. For thicker consistencies,
first remove the splashguard and blade
assembly (by its shaft), then empty
contents of the pitcher.
CLEANING & MAINTENANCE
CLEANING
1
Separate all parts.
2 Hand-Washing: Wash the lid,
splashguard, pitcher, and blade assembly
in warm, soapy water. When washing
the blade assembly, use a dish-washing
utensil with a handle to avoid direct
hand contact with blades. Handle the 40
oz. 4-Blade Assembly with care to avoid
contact with sharp edges. Rinse and air-
dry thoroughly.
Dishwasher: The pitcher, lid,
splashguard, and blade assembly are all
dishwasher safe. It is recommended that
the lid and blade assembly be placed on
the top rack. Ensure the blade assembly
is removed from the pitcher before
placing in the dishwasher.
3 Wipe the Master Pod clean with a
damp cloth.
HELPFUL TIPS
1
The 40 oz. 4-Blade Assembly can
be used for chopping meat, fish,
vegetables, cheese, etc.
2 For mincing, chopping, and pureeing,
increase the length of pulses.
3 For coarse chopping, use short, quick
pulses and monitor food texture.
4 Pre-cut larger pieces to make them
fit into the pitcher. When chopping
hard foods (e.g., meat, cheese) cut
into 1-inch cubes.
5 To crush ice into snow, start by using
short pulses to break up large chunks.
Also, don't use ice that has been sitting
out or has started to melt. Use ice
straight from the freezer, and make
sure the pitcher is completely dry
before placing ice in it.
STORING
Store the Ninja Storm™ upright with the 40
oz. 4-Blade Assembly inside the pitcher
and the splashguard and Master Pod on
the pitcher. Loosely wrap the power cord
around the Master Pod. DO NOT place
anything on top. Store the rest of the
attachments alongside the appliance or in
a cabinet where they will not be damaged
and won't cause a hazard.
ninjakitchen.com
9
Advertisement
