Setting The Time And Date - GE Interlogix Kalatel VDR User Manual

Disk End Out
The Disk End Out is activated when there is 5 minutes of
recording space left on the hard disk. The VDR must be in
Record mode and set to Continuous Overwrite mode.

1.9 Setting the Time and Date

It is recommended that, as a minimum, the following menu items be configured before using the unit.
For detailed information about using the menu system, see section 3.
Main Menu → Time/Date → Set Time Format
o
To set the Time format, use the Arrow buttons to select the desired
Time format. Format the time as either:
•
12 HOUR
•
24 HOUR
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Time/Date → Set Date Format
o
To set the Date format, use the Arrow buttons to select the desired Date
format. Format the Date as either:
•
DD/MM/YY
•
MM/DD/YY
•
YY/MM/DD
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Kalatel VDR
--OR—
--OR—
1-6
Output: Open Collector
High: Transistor Off
Low: Transistor On
Active When On.
Current Out: 10mA Max
Minimum Duration: 0.5 Seconds
Time Format Setup
Select Format
12 Hour
Date Format Setup
Select Format
MM/DD/YY
0150-0255B