Sony Handycam HDR-CX360 Operating Manual page 180

The file format is not supported by your

camcorder (p. 114).
Recording
Refer also to "Memory card" (p. 101).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE

to turn on the (Movie) or
(p. 25).
Your camcorder is recording the image you

have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete

unnecessary images (p. 51).
Total number of movie scenes or photos

exceeds the recordable capacity of your
camcorder. Delete unnecessary images (p. 51).
While [Drop Sensor] is activated (p. 96), you

may not be able to record images (HDR-PJ50/
PJ50V/XR160).
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is

extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with:

[Smth Slw REC]

[Golf Shot]

[ Fader]

The camcorder cannot shoot photos while it

is in the movie recording mode, depending
on the [ REC Mode] or [
selected.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you

have just shot on the memory card.
The imaging field looks different.
The imaging field may look different

depending on the condition of your
camcorder. This is not a malfunction.
(Photo) lamp
The flash does not work (HDR-CX360/
CX360V/PJ30/PJ30V/PJ50/PJ50V).
You cannot record with the built-in flash

while:


Even if auto flash or

reduction) is selected, you cannot use the
flash with:




The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the

time available for recording may be shorter,
for example when recording a fast moving
object, etc.
The camcorder stops operating.
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
Frame Rate]
The temperature of your camcorder is

extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the

camcorder, recording may stop.
US
10
the (movie) lamp is on
[Conversion Lens] is set to other than [Off]
(Auto redeye
[Spot Meter/Fcs]
[Spot Meter]
[Manual] in [Exposure]
[Twilight ], [Sunrise&Sunset], [Fireworks],
[Landscape], [Spotlight], [Beach] or [Snow]
in [Scene Selection]