Changing The Settings For Highlight Playback - Sony Handycam HDR-CX360 Operating Manual

Changing the settings for
Highlight Playback
You can make various settings for Highlight
Playback.
[Highlight Setting]
Touch
during Highlight Playback.
You can set the following items.
[Playback Range]

Set the range of movies to be played by selecting
the range of events from which event and to
which event, to be used as the playback range,
then touch . If you set the Highlight
Playback range by selecting events on the Map
View, select the "from" (starting) and "to"
(ending) date (HDR-CX360V/PJ30V/PJ50V).
If no range is set, the camcorder plays images in
the date range of the event selected on the Event
View as the playback range.
[Theme]

You can select a theme for Highlight Playback.
The music category is selected automatically
according to the theme.
[Music]

You can select and add music (p. 43).
[Length]

You can set the length of the Highlight Playback
segment.
[Audio mix]

The original sound is played back with the
music.
Touch / to adjust the balance between
the original sound and the music.
[Highlight Point]

You can set the points in a movie or photo that
will be used in a Highlight Playback.
Play the desired movie or photo, and then do
the following.
Movie: Play the desired movie, and then


touch
use in a Highlight Playback.
Photo: Play the photo you want to use in a

Highlight Playback, and then touch

Notes
You cannot set a Highlight point when the

Map View is displayed (HDR-CX360V/PJ30V/
PJ50V). However, the Highlight point that was
set when the Event View was displayed can take
effect on the Map View.
The audio used for the Highlight Playback will

be converted to 2ch stereo.
The [Playback Range] setting is cleared when

the Highlight Playback stops.
When you connect the camcorder to an

external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.
Tips

You can select [Highlight Setting] on the screen

after a Highlight Playback has finished.
You can transfer music files from audio CDs

or MP3 files to your camcorder, and play them
with Highlight Playback using the supplied
software "PMB" or "Music Transfer, " a software
installed together with "PMB. "
After the music file is transferred to the

camcorder, if you cannot play the music, the
music file may be damaged. Delete the music
file by touching
(Playback Settings)]  [Empty Music],
[
then transfer the music file again. If you
delete music files using [Empty Music], the
music data recorded on your camcorder at the
factory will be deleted too. In this case, you can
restore them using Music Transfer, a software
installed together with "PMB. " For operating
instructions, see Music Transfer help.
US

at the point you want to
.
(MENU)  [Setup] 