Ozito EMB-2000 Instruction Manual
Ozito EMB-2000 Instruction Manual

Ozito EMB-2000 Instruction Manual

600w electric mini blower

Advertisement

Quick Links

ELECTRIC
MINI
BLOWER
600W
INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
230-240V ~ 50Hz
Power:
600W
No Load Speed:
11,000/min
Air Pressure:
3.0kPa
Weight:
1.65kg
ozito.com.au
WHAT'S IN THE BOX
Mini Blower
EMB-2000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EMB-2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito EMB-2000

  • Page 1 WHAT’S IN THE BOX ELECTRIC MINI Mini Blower BLOWER 600W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 600W No Load Speed: 11,000/min Air Pressure: 3.0kPa Weight: 1.65kg ozito.com.au EMB-2000...
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION MINI BLOWER 1. ASSEMBLY 1 Nozzle 4 Plastic Cap 2 Blower Outlet 5 Blower Housing Ensure the tool is disconnected from the power supply before performing any of the following operations. 3 On/off Trigger 6 Lock-on Button Fitting the Nozzle 1.
  • Page 3 OPERATION 2. CONTROLS 3. OPERATION The tool is recommended for use with a residual current device with a rated residual current of 30mA or less. On/off Trigger 1. To turn on, squeeze the 1. Plug the tool into the mains power. on/off trigger.
  • Page 4 Always replace both carbon brushes at the same time. Carbon Brush SPEMB2000-02 Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the mini Blower Tube Assembly SPEMB2000-22A blower by an unauthorised person or by mishandling...
  • Page 5 Model No. EMB-2000 Tool: 600W Workshop Blower SPARE PARTS Model No. EMB-2000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No.
  • Page 6 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
  • Page 7 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1213...

Table of Contents