Title Assignment - JVC KD-S100 Instructions Manual

Title assignment
You can assign titles to station frequencies, CDs (both
in this unit and in the CD changer) and the external
components (LINE-IN and EXT-IN).
rn
Repeat steps [II to
W
until you finish entering
the title.
W
Move to the next (or previous) character
position.
Maximum number of characters
Sources
Station
frequencies
CDs/CD-CH*
External
component
Up to 16 characters (up to 30 station
frequencies including both FM and AM)
Up to 32 characters (up to 30 discs)
Up to 16 characters
4
Finish the procedure.
• To cancel the title entry without
registration, press MENU.
*
You cannot assign names to any discs other than
conventional CDs.
1
Select the sources.
• For FM/AM tuner: Select astation.
• For CDs in this unit: Insert aCD.
• For CDs in the CD changer: Select "CD-CH," then
select adisc number.
• For external component: Select "LINE-IN" or
"EXT-IN."
2
Enter the TITLE menu (see page 4).
3
Assign atitle.
[II Select acharacter set.
\[c'
DISP1!\
A(A - Z: upper case) -
a
(a - z: lower case)
- 0 (numbers and symbols) -
A
(Accented
letters: upper case) - Ii (Accented letters:
lower case) - (back to the beginning)
[II Select acharacter.
Available characters
In addition to the Roman alphabets (A - Z, a- z),
the following characters will be used.
Accented letters: upper case
To erase the entire title
In step 3...
\ DISP'\
[Hold]
...