Configuration Of The Settings Relating To The Mail Notification [Notification] - Panasonic WV-SW390 Series Operating Instructions Manual

3.
Click the [Set] button after completing the settings.
IMPORTANT
•
The setting will not be applied unless the [Set] button is clicked.
4.
To invalidate the VMD area, click the [Set] button after selecting "Off" for "Status" of the VMD area to be
invalidated.
→
The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated,
no alarm will occur even when a motion can be recognized in the area.
5.
To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.
→
The outline of the respective VMD area will disappear.
6.
Click the [Set] button.
→
The edited settings will be applied.
7.
Click the [Back] button to return to the screen to select a preset position.
13.8 Configuration of the settings relating to the mail
notification [Notification]
Click the [Notification] tab on the "Alarm" page. (®page 43, page 45)
The settings relating to the alarm mail can be configured. It is necessary to configure the settings of the mail
server to perform the mail notification. (®page 155)
Mail notification
[Mail server >>]
When "Mail server >>" is clicked, the [Mail] tab of the "Server" page will be displayed. (®page 155)
13 Configure the alarm settings [Alarm]
Operating Instructions 141