Advertisement
Step 1. Release folding lock (B).
Step 2. Spread handle (C) and seat apart until
the frame clicks and locks on both sides.
Step 3. Ensure that the stroller is locked in on
both sides before using.
ASSEMBLING REAR WHEELS TO AXLE
Step 1. Slide wheel assembly onto axle.
Step 2. Slide washer onto axle.
Step 3. Fit straight part of cotter pin through
hole on axle.
Step 4. Line up each of the tabs in the hub
cap with the slots in the wheel, snap hub cap
into place.
Step 5. Fit cover to collet by firmly pressing
the cover into place.
Step 6. Push wheel hub cap onto the wheel
hub and make sure that the securing lugs
correctly locate into mating slots in wheel hub.
Step 7. Repeat for other side.
4
UNFOLDING THE STROLLER
C
B
HAPPY TRAILS Pet Stroller
PG8100
Advertisement
