Arming And Disarming; Arming At Night; Contact Information - LaserShield Instant Security System Quick Start Manual

7

ARMING AND DISARMING

• When you leave the premises, press the Arm button
on your Keychain Remote to arm the system
(MAU will announce "LaserShield Arming")
• Exit within 60 seconds
• When you return to the premises, press the Disarm
button on your Keychain Remote to disarm the system
(MAU will announce "LaserShield Disarmed")
NOTE: When returning, a warning tone will beep for 20 seconds to remind you to Disarm.
8

ARMING AT NIGHT

• If you wish to bypass a Wireless Detection Unit (e.g. in a bedroom)
press the Bypass button on that unit
• Press the Arm button on your Keychain Remote
(MAU will announce "LaserShield disarmed,
Satellite number X bypassed, fix
the condition or press the arm
button again to force arming")
• Press the Arm button a second time
(MAU will announce "forced arming")
NOTE: Remember to press Bypass button to re-enable unit before leaving your premises.
MAU will always announce any bypassed unit during arming.
WDU Panic buttons still work during Bypass mode.

CONTACT INFORMATION

Please contact LaserShield Customer Care at 1-800-ALARM-55 if you have any
questions, or visit our web site at www.lasershield.net to get the latest information
on using your LaserShield Security System.
LaserShield
LaserShield Customer Care
LaserShield Systems, Inc.
277 E. Amador, Suite 304
Las Cruces, NM 88001
© 2008 LaserShield
Security Systems, Inc.
®
Systems, Inc. All Rights Reserved.
®
Press LEFT Button to Disarm
Press RIGHT Button to Arm
Press Button
to Bypass